NDFarmer wrote:
anybody else having low frame rate issues? possible multi screen related issue?
Known Cattle and Crops Bugs And Their Fixes
-
-
brandonb21 wrote:
when you use cab control to turn the tractor on then back off again it breaks the game and you wont be able to start your tractor again.
-
I am having the FOS drop massively on Two Radeon RX470 Graphics card and a Multicore system No matter what I do it has that issue along with very unresponsive controls and walking animations issues.
-
Game looks good. I can't seem to get the mouse to move to select the in cab options. I've mapped the key to my right mouse button but the pointer will not move. I cant select "Okay" to end the mission either. Is this a bug? Suggestions?
-
Boss13 wrote:
Game looks good. I can't seem to get the mouse to move to select the in cab options. I've mapped the key to my right mouse button but the pointer will not move. I cant select "Okay" to end the mission either. Is this a bug? Suggestions?
-
It worked, nice. Thank you chiloopabatman
-
So far looks good, still doing small adjustments to get it to run smoother. 1 prob is when I've done the changes an save, the screen goes to small screen?as said in someones comment above. When cultivating field if you turn the tractor tends to slip sideways? as you go around, don't know if it's cos of the cultivator pulling on it?? Otherwise GOOD job.
-
ChiloopaBatman wrote:
NDFarmer wrote:
anybody else having low frame rate issues? possible multi screen related issue?
-
So far I've had to re-start the installer about 5 times, gets stuck on the buildings pack. Can't wait to play.
-
NDFarmer wrote:
ChiloopaBatman wrote:
NDFarmer wrote:
anybody else having low frame rate issues? possible multi screen related issue?
-
Cannot complete the mission to 100% (3 times trying)
I've tried three times to complete the initial mission of cultivating the field to 100% but cannot get to 100%. Each time I went over the entire field at least three times. The last time I cultivated the field only in 1/2 spans of the cultivator instead of slight overlaps of row over row, but still could not complete mission. Mission bar shows no white (uncompleted amount), so it looks as though it is either complete (but not registering as such) or is just ever so barely not complete...99% or the like?
Edit: I should add that I completely restarted the game each time before re-attempting the mission, so yes it was reproducable twice over.
I have extensive hours in FS13, 15, and 17 so definitely know how to cultivate a field. Other than that, very nice looking game.
Running windows 7 on full screen (1920x1080) with absolutely no graphical issues.
Intel i5-4690@3.5 w/ 8G RAM and Nvidia GeForce GTX970 -
Is there a zooming function in the game? I can't find it
-
Bunyan wrote:
Cannot complete the mission to 100% (3 times trying)
I've tried three times to complete the initial mission of cultivating the field to 100% but cannot get to 100%. Each time I went over the entire field at least three times. The last time I cultivated the field only in 1/2 spans of the cultivator instead of slight overlaps of row over row, but still could not complete mission. Mission bar shows no white (uncompleted amount), so it looks as though it is either complete (but not registering as such) or is just ever so barely not complete...99% or the like?
Edit: I should add that I completely restarted the game each time before re-attempting the mission, so yes it was reproducable twice over.
I have extensive hours in FS13, 15, and 17 so definitely know how to cultivate a field. Other than that, very nice looking game.
Running windows 7 on full screen (1920x1080) with absolutely no graphical issues.
Intel i5-4690@3.5 w/ 8G RAM and Nvidia GeForce GTX970
-
frankw67 wrote:
Is there a zooming function in the game? I can't find it
-
No matter how bloody hard i have tried i just can not get the field finished. tried going round the edges doing it all again it just wont work. There is a button saying comeplete mission or what i think is a button but i can't get the mouse onto the screen to use it!
-
Changing advanced graphics settings causes the game to insta crash, followed by being unable to restart it unless i do a complete uninstall/reinstall.
Including checking for leftover C&C folders.
CPU use shows about 50% of ONE thread..
Really???? ONE thread? please tell me that is only in this tech demo.....
Kind of explains the horrible fps though.
Is this tech demo running in perma debug mode for data gathering purposes?
Gpu use spikes up and down quite fast, also explained by what seems like a deliberate cpu bottleneck.
Game looks really nice overall, going to take it easy and give the devs some time to absorb the data they get from this test.R5 3900x / Crosshair 6 Hero / 32 GB Gskill FlareX 3200 / Vega 64 LC/ Samsung 960 Evo NVMe
M.2 500GB / Samsung 840 Evo Sata 6 500Gb / 1TB WD Blue / Thermaltake 360mm AIO
/ Corsair HX 850w / Phanteks Enthoo Pro / Win10 Home 64 bit / LG 34UM88C 3440 x 1440 21 x 9 monitor. -
For anyone that opened their door and cant work out how to close it, use the window in the top right with all the "user actions" and click on the right door to "open" the already opened door, then click it a 2nd time to close.
You can also click the 0.0 in the corner of the "R" door and assign it to hotkey 1.
I cant assign workers to a task (game crash)
I cant finish off cultivating field one after completing quest 2 (cultivate field 2). It wont allow me to lower the cultivator. -
I have around 60/70 fps but im getting odd stuttering continuously, they are not frame drops as fps stays at number.
Does anybody else have this issue? Drivers are updated to latest.
It does seem to get better after playing for around 10 minutes..
EVGA GTX 680 2GB
I7 7700K
16gb ram DDR4 @3000Mhz
Windows 10 64bit.The post was edited 1 time, last by Strongbird ().
-
hellom
it is impossible for me to get in the tractor with E key on left side. I have open the door but i can't climb in the tractor.
Any tips ? -
Bugs:
I can not finish missions in any field.
During the night and the climatic effects (fog or rain) the game lowers in reluctantly.
The cab functions do not work properly.
There is no way to change between the implements to release the weight and put the bar of protection.
As a first glance is fine but there is little to do, I hope they introduce
content fast or I see it impossible to introduce the EA before autumn. -
FPS 404 not found.
On low 16, on high 12. Sometimes the grey glitch appear, however I using AMD GPU.
Specs:
FX8350@4,3
16GB RAM
R9 280
It is not a power plant, but it runs other games at medium-high 45-60 FPS. -
Things to do:
1) can't start engine using key in cab. Only stoping it works. Engine start when use W key.
2) Better engine sounds under load.
3) When attaching cultivator to front hitch - it gets very sharp angle. -
Hello,
Big drop FPS when the mission GPS is on !
My config :
Windows 10 64bit
Intel core i7 6700K @ 4 GHz
32 Go de RAM
GTX 760 2go -
AI Vehicles act like drunk drivers from time to time, crossing lanes, etc.
Also, AI vehicle windows are not standard. They either look like they've got frosted class, or silly brick or seat textures over them. It would be a lot nicer to have transparent windows. I know this isn't necessarily a bug, but it's kind of annoying.
I notice that the tractor wheels start to spin before the tractor begins moving. -
shakaah wrote:
GTX 760 2go
-
I cant even launch!
Which sucks!
Seems to of installed okay, password was ok and as soon as i hit the launch button it crashes with this message:
CattleAndCrops.exe caused ACCESS_VIOLATION in module "C:\Program Files (x86)\Cattle and Crops\Game\Win64\CattleAndCrops.exe" at 0033:00000000E3B93A79, C4::Cursor::Update()+137 byte(s)
Can anyone decipher this and explain in normal terms? Im not a techy and have no idea!
Im running:
Intel Core i5 2.4GHz Boost up to 3.0GHz
Intel HD graphics 3000
Is this a problem because its a 'built in' graphics card? I have checked and its running all the up to date drivers. -
Hi.
Very nice sim very smove play and awsome graphics Thank's CNC!
Just a couple of small isues found.
1 In options Settings Graphics. Samples/Pixel set at 4 try to reset to 2 & game crashes.
2 As above Frame rate sync set at Smart Try to reset back or off crashes Game.
Other than that all is Fine Thnk's!Interfarms Ceo. -
Hi,
I can move in the game but everything on my screen is grey. Changing resolutolution and graphic settings doesn't help
imgur.com/a/1EusI
My config:
NVIDIA GeForce GTX 970 - drivers 382.53
Intel core i5-4690k @ 3.50 GHZ
Windows 10 64 bit -
Changing 3rd person to 1st person while walking moves the display to underground. Cured by standing still and changing view
-
Fyremintar wrote:
Hi,
I can move in the game but everything on my screen is grey. Changing resolutolution and graphic settings doesn't help
imgur.com/a/1EusI
My config:
NVIDIA GeForce GTX 970 - drivers 382.53
Intel core i5-4690k @ 3.50 GHZ
Windows 10 64 bit
-
Yes, they are updated.
-
to start the game looks pretty good so far
now to the issues
low fps 7-18 fps is all i get.
cpu use 1 core at about 15-20%
gpu use 1-50% spikes
tractor drives like a race car
cant cultivate whole field.
system specs
cpu amd 8530
gpu ati r9 290x
32 gb ram -
Fyremintar wrote:
Yes, they are updated.
-
i can't even play the game, grey screen with just a minimap in the corner, im not even using a NVIDIA gpu, i've got an AMD one
-
Narod wrote:
i can't even play the game, grey screen with just a minimap in the corner, im not even using a NVIDIA gpu, i've got an AMD one
-
Share
- Facebook 0
- Twitter 0
- Google Plus 0
- Reddit 0
-
Similar Threads