Hi, I have been disassembling some models to see if they can create something new and for now the result is quite negative especially in the control of Cutting I cannot get the volume and humidity control scripts to work for me outside the models that are now anyway these are the advances
sharemods.com/lfsdhygg8unl/macdon.zip.html
Macdon has a new version but for now the adapter cannot be separated from the cutter therefore there is now a cutter + adapter to combine and an adapter and cutter for the tractor, I am also testing with another model to see the possibility of doing the PW7 or 8 from Macdon but the conversion performed by the Swath = fruitColector is not correct and the combine tank fills up very quickly
macdon.com/en/video/macdon-pw8-pick-up-header-in-australia/
It is very necessary to be able to correctly control cutting and the associated path since the cutters need more suitable particles and meshs but for now I have not succeeded, I have only added the particles along the path depending on the swath
![](https://forum.cattleandcrops.com/attachment/11368-20200713174828-1-jpg/?thumbnail=1&s=3f38a734fcc6b8dffdb3944d6171ccf43ec3dae1)
![](https://forum.cattleandcrops.com/attachment/11369-20200713174906-1-jpg/?thumbnail=1&s=3f38a734fcc6b8dffdb3944d6171ccf43ec3dae1)
![](https://forum.cattleandcrops.com/attachment/11370-20200714092912-1-jpg/?thumbnail=1&s=3f38a734fcc6b8dffdb3944d6171ccf43ec3dae1)
![](https://forum.cattleandcrops.com/attachment/11371-20200716133953-1-jpg/?thumbnail=1&s=3f38a734fcc6b8dffdb3944d6171ccf43ec3dae1)
![](https://forum.cattleandcrops.com/attachment/11372-20200716134755-1-jpg/?thumbnail=1&s=3f38a734fcc6b8dffdb3944d6171ccf43ec3dae1)
![](https://forum.cattleandcrops.com/attachment/11373-20200716134914-1-jpg/?thumbnail=1&s=3f38a734fcc6b8dffdb3944d6171ccf43ec3dae1)
![](https://forum.cattleandcrops.com/attachment/11374-20200716134957-1-jpg/?thumbnail=1&s=3f38a734fcc6b8dffdb3944d6171ccf43ec3dae1)
![](https://forum.cattleandcrops.com/attachment/11375-20200716140405-1-jpg/?thumbnail=1&s=3f38a734fcc6b8dffdb3944d6171ccf43ec3dae1)
sharemods.com/lfsdhygg8unl/macdon.zip.html
Macdon has a new version but for now the adapter cannot be separated from the cutter therefore there is now a cutter + adapter to combine and an adapter and cutter for the tractor, I am also testing with another model to see the possibility of doing the PW7 or 8 from Macdon but the conversion performed by the Swath = fruitColector is not correct and the combine tank fills up very quickly
macdon.com/en/video/macdon-pw8-pick-up-header-in-australia/
It is very necessary to be able to correctly control cutting and the associated path since the cutters need more suitable particles and meshs but for now I have not succeeded, I have only added the particles along the path depending on the swath
The post was edited 1 time, last by XYZSPAIN ().