Nybyggarn

KS silver
  • Male
  • Member since Mar 19th 2017
Last Activity
  • Nybyggarn -

    Liked XYZSPAIN’s post in the thread links to mods for test and other features.

    Like (Post)
    This is already finished the ropes behave quite well without placing blockers and the height to the ground is checked as in other models with which the renders are quite beautiful forum.cattleandcrops.com/attac…5c6c538e3c958d06ded6471a6
  • Nybyggarn -

    Liked XYZSPAIN’s post in the thread links to mods for test and other features.

    Like (Post)
    This can be a pack of interesting objects although for now only for manual use youtube.com/watch?v=1cgCDIaCw6I for the moment I go draw the terrajet and maybe with some pieces of others a terradisc
  • Nybyggarn -

    Replied to the thread Status Update 13 Sep 2019.

    Post
    @Dylan81 but I bought mine just two months ago ☹️
  • Nybyggarn -

    Replied to the thread Status Update 13 Sep 2019.

    Post
    Quote from ReVO26: “@gheazu Who is talking about 20fps? I have stable 60+ on high settings. 2-3 months ago I could say something about fps(had 40-55), but now it works good. Hope for much better in the future. ” What is your spec?? I have vega56 and an…
  • Nybyggarn -

    Replied to the thread Status Update 13 Sep 2019.

    Post
    @gheazu Well you have a piece of news right above your post? So obviously it ain't dead? Or have I missed something?
  • Nybyggarn -

    Liked masterbrain’s post in the thread Status Update 13 Sep 2019.

    Like (Post)
    We are in the process of revising the Dammann Feldspritze together with your feedback, there are several points for the height measurement, so the boom can now automatically adjust the inclination and height on uneven terrain.
  • Nybyggarn -

    Liked Nachtfalke’s post in the thread modding by revo (tractors, cultivator, ...).

    Like (Post)
    I personally like it to get news if there is something new to tell or show. So I don't know if "daily" or "weekly" is the "right" rythm. Perhaps just post something new if you can/want to show something new :) Then you are free and you can decide when and…
  • Nybyggarn -

    Replied to the thread Status Update 13 Sep 2019.

    Post
    Quote from Octopuss: “OpenGL is a dinosaur and I just don't understand why would anyone be willingly dealing with that. Even Dx11 is better. ” I would assume they chose this engine because it's fairly cheap and that they gott to access to it's code…
  • Nybyggarn -

    Liked XYZSPAIN’s post in the thread links to mods for test and other features.

    Like (Post)
    taking advantage of the refill question I have made a small modification in a trailer to be able to test, for now the problems are with the fill mesh textures and the filltypes that are placed in tank controler; after a few hours these are the results -…
  • Nybyggarn -

    Liked XYZSPAIN’s post in the thread links to mods for test and other features.

    Like (Post)
    @stdok I have tried it with the slurry trailer and it does not work for now if you can choose in the planning but for now something is disconnected and the truth is the logical thing would be to have objects in closed circuit that will take care of the…
  • Nybyggarn -

    Replied to the thread Status Update 16 May 2019.

    Post
    Quote from Nachtfalke: “Quote from Nybyggarn: “How long before the update is released? Long time since we got new stuff to play with. ” Check the Timeline. We don't know more than that, too. ” I know, was a question more ment towards the…
  • Nybyggarn -

    Replied to the thread Status Update 13 Sep 2019.

    Post
    Well they promised a realistic/believable engine modell so they will have to put that in the engine if it's not supported
  • Nybyggarn -

    Liked ReVO26’s post in the thread modding by revo (tractors, cultivator, ...).

    Like (Post)
    After a really long break from modding I am back. At least today :D . I have already started working on combine. Interior panel is done, only monitor is going to be rescaled. After that I will take care of other interior's parts. The next one is to…
  • Nybyggarn -

    Replied to the thread Status Update 13 Sep 2019.

    Post
    Is there any apoximation of an release date?
  • Nybyggarn -

    Liked masterbrain’s post in the thread Status Update 13 Sep 2019.

    Like (Post)
    Today we have new information about the current state of development and what we are working on at the moment. So far CNC has an engine basis of the C4 Engine with some parts of the successor of the Tombstone Engine. For the Season Update we want to…
  • Nybyggarn -

    Replied to the thread progress bar problem.

    Post
    You might not be the only one, I think some people don't report bugs, and some one in the German part might have reported it before. But it's good that you brought up the problem, now they at least now it exists.
  • Nybyggarn -

    Posted the thread Stuck on the pile of sand outside barn.

    Thread
    As the title says, i ran around a bit and wondered if i could run up on the sand piles outside the barn. Well yes i could but i also got stuck. forum.cattleandcrops.com/attac…5c6c538e3c958d06ded6471a6
  • Nybyggarn -

    Posted the thread Bucket tipping slows down when bucket is angled down to much.

    Thread
    So when i did the BGA intro i noticed an interesting bug with the bucket. If you tip the bucket enough "down" the emptying of it will slow down. I have no own footage of it but here you can see in Gav808's video what I'm talking about.
  • Nybyggarn -

    Replied to the thread Chopping radio stream.

    Post
    Yea that's what I've been doing instead.
  • Nybyggarn -

    Replied to the thread Chopping radio stream.

    Post
    Thanks! Now I atleast know it's not wrong on my part. Will just have to find another good country stream