That FPS improvement is real, the game actually feels good to play now that I can get 60 FPS consistently. Great job on the update!
Early-Access-Update-Release v0.9.5 Tombstone
-
-
@pietro200
I can imagine that your iGPU is no longer supported since the switch to the tompstone engine.
The minimum system requirements always assume a dedicated graphics solution.
It was probably rather lucky that you were able to run with the graphics integrated in the processor before.
Which virus scanner is currently running on your system and how high is the Ram load just before you start the game?AMD Ryzen 7 5800X, 32GB DDR4 3800Mhz, Gigabyte X570 Elite, AMD Radeon RX 6900XT, BeQuiet! Straight Power 850W, BeQuiet! Pure Base 500DX weiß, 3x 27" Dell WQHD Monitore, Saitek Seitenkons., CSL DD, HP Reverb G2 -
-
Okay.
what you might want to try is to disable AVG and start the game.AMD Ryzen 7 5800X, 32GB DDR4 3800Mhz, Gigabyte X570 Elite, AMD Radeon RX 6900XT, BeQuiet! Straight Power 850W, BeQuiet! Pure Base 500DX weiß, 3x 27" Dell WQHD Monitore, Saitek Seitenkons., CSL DD, HP Reverb G2 -
no, I tried to disable the antivirus but the same message still comes out. it will probably be the graphics card that is unable to support the game. it's a shame because before it worked
-
It's like I said... it was pure luck that it worked.
The minimum requirements of the game are not reached with your graphics card.
do you have no possibility to upgrade at least one small graphics card?AMD Ryzen 7 5800X, 32GB DDR4 3800Mhz, Gigabyte X570 Elite, AMD Radeon RX 6900XT, BeQuiet! Straight Power 850W, BeQuiet! Pure Base 500DX weiß, 3x 27" Dell WQHD Monitore, Saitek Seitenkons., CSL DD, HP Reverb G2 -
thank you so much for your support. when i change graphics card i will go back to play this nice game
-
Hi all I posted this issue on Steam forum but got no responses so decided that the devs are more likely to see it on here.
I play on linux and since this patch my graphics are all oily (best way to explain it) - See the picture below.
I have attempted and changed every graphics option possible and turned each one on and off individually. Also tried full screen and windowed, low and ultra and although it changes it doesn't go away. I have removed the game and reinstalled and deleted my ~/.cattle-and-crops folder and started completely afresh. Still no die.
I have attached my tombstone and debug log
Any help much appreciated.
-
CPU: Intel Core i7-8700,6x3700 MHz Turbo bis zu 4700 MHz, CPU-Kühler: CSL Maelstrom 120 Wasserkühlung, 500GB SSD +3000GB Seagate/Western Digital, 32GB DDR4-Ram, GTX 1080 Ti Armor 11G OC 11GB GDDR5X, Mainboard: ASUS Prime Z370-P, Netzteil: 700 Watt Power Boost 80+ Gold, Windows 10 Home 64-Bit, Logitech G29 und Saitek Seitenkonsole
-
pietro200 wrote:
no, I tried to disable the antivirus but the same message still comes out. it will probably be the graphics card that is unable to support the game. it's a shame because before it worked
Can you run any other 3D graphics game on this computer?
Perhaps you can download and install GPU-Z and post us a screenshot:
techpowerup.com/download/techpowerup-gpu-z/
Regards
Nachtfalke -
@Nachtfalke
I did as you said, I installed the program and made screenshots of what appeared. I attach them below
however in the afternoon I tried to use Farming Simulator 2019 and it works very wellThe post was edited 1 time, last by pietro200 ().
-
@pietro200
I am still a little bit confused. Some posts earlier I was asking if you have two different graphics cards within your computer. Now it looks like you have the intel and you have the nvidia. Is it right you have both within the same computer? If this is true the can you try to disable the Intel GPU for 3D games and vice versa with the nvidia GPU?
I assume - like @DannyA4 already said - that with the new update to Tombstone 2.9.1 some new OpenGL features are neccessary. Perhaps for some reason the one or the other graphics card within your computer does not support it.
So I would assume to check if you can run the game with the nvidia GPU because we could see in the older Debug.log that it was running with the Intel GPU.
I can not see the amount of Memory which is assigned by your BIOS to the Intel HD Graphics card. You should check that you have at least 1 GB assigned, better 2 GB. -
thank you very much. I will investigate trying to disable the intel card. I'm sorry I wasn't clear in reporting the information but honestly in my answers I gave you the information I knew. however using the "Can I Run It" program configured for Cattle and Crops it detects my computer not suitable even to support the minimum requirements (taking into account the Nvidia graphics card)
-
pietro200 wrote:
however in the afternoon I tried to use Farming Simulator 2019 and it works very well
Farming Simulator uses the graphics API Direct X in the last parts, but CNC uses OpenGL.
Then the supported OpenGL version of the graphics card is important, in your screenshots you can see that only OpenGL 1.1 is supported...by both graphics cards. I think version 4.5 is the minimum, see the minimum requirements for MacOS/Linux at Steam.
Rob once said in some post that the OpenGL versions have been updated, at least version 4.6 is currently used.
Both of your graphics cards have too little power to run CNC properly.
If it's a laptop (and the graphics card is actually a GT 730m), you could try to install a slightly older driver version, you have the latest one installed on your computer, but officially Nvidia offers an older version for this graphics card:
nvidia.co.uk/Download/driverResults.aspx/145959/en-uk
try it.AMD Ryzen 7 5800X, 32GB DDR4 3800Mhz, Gigabyte X570 Elite, AMD Radeon RX 6900XT, BeQuiet! Straight Power 850W, BeQuiet! Pure Base 500DX weiß, 3x 27" Dell WQHD Monitore, Saitek Seitenkons., CSL DD, HP Reverb G2 -
-
-
noAMD Ryzen 7 5800X, 32GB DDR4 3800Mhz, Gigabyte X570 Elite, AMD Radeon RX 6900XT, BeQuiet! Straight Power 850W, BeQuiet! Pure Base 500DX weiß, 3x 27" Dell WQHD Monitore, Saitek Seitenkons., CSL DD, HP Reverb G2
-
ok, thanks
-
AndrewC wrote:
Hi all I posted this issue on Steam forum but got no responses so decided that the devs are more likely to see it on here.
I play on linux and since this patch my graphics are all oily (best way to explain it) - See the picture below.
I have attempted and changed every graphics option possible and turned each one on and off individually. Also tried full screen and windowed, low and ultra and although it changes it doesn't go away. I have removed the game and reinstalled and deleted my ~/.cattle-and-crops folder and started completely afresh. Still no die.
I have attached my tombstone and debug log
Any help much appreciated.
Welcome to the forum and thanks for reporting the issue!
I was able to reproduce it with a Radeon RX580 on Linux, using the open source drivers.
With the nvidia drivers (on Windows or Linux) and AMDs Windows drivers it doesn't happen so we didn't notice it before release..
We'll fix this for the next release.
BTW, if you have more issues on Linux, please report them in the Bugreports & Feedback -> Linux subforum - that makes sure I won't miss them -
Many thanks - that is really great that you have tracked it down
-
As we’ve released the Tombstone update two weeks ago, the natural flow of things determines it’s time for some bug fixes. We’re planning to release v0.9.6 early next week. Until then it’s in the testing department’s capable hands. , In addition, we’ve included a little surprise for you.
Stay safe, and stay home. -
-
It does thank you very much - I have tried medium, high and ultra and all options are looking good
-
Awesome, thanks for the confirmation and have fun with the game!
-
Hi, i can´t hire any workers. It say 0 / 1 employees. I don´t have any workers i the list to pick. it´s only me ?
-
Bemingo88 wrote:
Hi, i can´t hire any workers. It say 0 / 1 employees. I don´t have any workers i the list to pick. it´s only me ?
-
Hi, I wrote some time ago because after updating the game (to version 0.9.5) with the introduction of Tombstone I noticed that the game crashed before leaving. I had been advised to use a program that took the characteristics of the graphics card (Cpu-Z) (as a message appeared stating that my card had problems with the game). Using it it was revealed that my computer had 2 cards (one Intel and one Nvidia). Both of my cards supported Opengl to version 1.1 while a higher version is required. By trying a few days ago, the same program no longer identifies the fact that my cards support Opengl and not only, going on "lookup" I noticed that my card (Nvidia Geforce 730 2gb) should support Opengl to version 4.6. I know that in any case it would be a "weak" card for this game, but as long as I can't change it I'm happy. I wrote here because I didn't know who to ask for advice. Thanks for the attention
-
Hello, if you look at the minimum system requirements, you will find that the minimum graphics card required is a GTX 760.
Please go to this link and see the difference between your graphics card and a GTX 760:
gpu.userbenchmark.com/Compare/…Force-GT-730/2159vsm12582
It is not just the pure performance difference that makes these graphics cards so far apart. It is also the feature level.
You will never be able to play decent games in good quality with your GT 730.
You can already see the difference with Nvidia in the description: GTX vs. GT, GTX stands for a gamer graphics card, GT only for a small office solution.AMD Ryzen 7 5800X, 32GB DDR4 3800Mhz, Gigabyte X570 Elite, AMD Radeon RX 6900XT, BeQuiet! Straight Power 850W, BeQuiet! Pure Base 500DX weiß, 3x 27" Dell WQHD Monitore, Saitek Seitenkons., CSL DD, HP Reverb G2 -
Okay, I have no more doubts now. I will wait waiting for a better card. Thanks anyway
-
Share
- Facebook 0
- Twitter 0
- Google Plus 0
- Reddit 0
-
Users Online 2
2 Guests