Early-Access-Update-Release v0.3.0.0 - Grassland

    • Early-Access-Update-Release v0.3.0.0 - Grassland




      The Grassland Update v0.3.0.0 is now available for download. This update brings the grassland cycle to Cattle and Crops.

      Drying: The weather will affect the swath’s drying process. In dry weather, the wetness in the swath decreases; when raining it increases greatly. The grass needs good weather for it to become hay. During drying the grass will go through different stages depending on it’s wetness, grass (over 70%), silage (70% - 40%) and hay (below 40%). After four hours of rain, the swath reaches 100% wetness and can’t get any more wet. To dry completely, the hay needs about three days without any rain.

      Volume: Windrows are based on realistic volumes and thus will have varying heights. Checking your speed when baling is now more important so your pickup won’t get clogged up. Wetness and volume will also affect the particle systems’ visuals.

      Calendar: You can find the perfect time for cutting and harvesting the grass by checking the calendar in the Planning Menu. Clouds are symbolized as grey, with LC (low cloudiness) and HC (heavy clouds) showing you the cloudiness. To everyone’s surprise, a big yellow dot means sun, while dark grey gives you rain. The forecast is valid for two weeks.

      Three-point hitch: one would assume that bringing a tedder and a rake into the game would be easier than the previous machines. Making them behave as realistic as possible, we had to extend the three-point hitch system a lot. Thus, for example, trailing machines like the Volto 80 or Liner 500 are now possible as well. In addition, the three-point hitch won’t push the tractor away from the ground as often as it did before. We have also minimised the lateral forces when pulling a plow.

      Modding: The .pak file format has been replaced with more user-friendly .zips. Additionally, we’ve added a ton of joint options that currently come to fruition in the Claas Volto and Liner machines. Furthermore, we’ve opened up the translation and XML files - so if you’re in the business of adding your local language, you’re in luck.

      Mission: There’s a new story quest in which you can try out the grassland process. The mission is not a requirement and can be skipped.

      With grassland, in addition to grain and corn, we have reached another milestone on the way towards v1. This is our biggest and most comprehensive update so far, so we decided to split up it into two updates. The bigger part of grassland is included in this update - in the second part we’ll add the loader wagon and the mowing unit for forage harvesters and continue to balance the update. After the second part is out we’ll focus on bug fixing until Christmas. The timeline will be adjusted accordingly.

      And don’t forget, it’s Steam Autumn Sale! Until November 27th, 7pm CET there is a 50% discount on Cattle and Crops for all supporters (upgrades) and those who want to become one!

      Website: https://www.cattleandcrops.com/en/kickstarter
      Steam: store.steampowered.com/app/704030/Cattle_and_Crops/

      As always, changes, bug fixes and new features can be found in the changelog.

      We are looking forward to your feedback! If you like CNC, leave a positive review on Steam!

      Your MBB Team


      Changelog:
      • NEW: Field grass seeds can be bought at the trader in the Albergtal map
      • NEW: The first upgrades from the Tombstone Engine, the successor of the C4 Engine, are implemented in the update. The new ring detail system optimizes the visibility tests immensely, for example, taking the load off the CPU as well as the video cards. In addition, all distant objects are faded in and out smoothly (with exception of the trees, we’ll have to tackle them in a future update).
      • NEW: The fading of the plants on the ground has been enhanced strongly: plants don’t just pop up any longer but are being faded in with a smooth transition. The computation for this runs in the background so that the feature also has a positive impact on the performance
      • NEW: The culling of the plants around the player has been enhanced by multicore support. This makes for a more stable framerate when the camera is being moved fast continuously
      • NEW: The pak. files have been replaced by .zip files, so mod creators can have easier access to all the assets
      • NEW: The source language files for German and English have been added to the import directory
      • NEW: Cruise control has been improved: the three speed stages can be set individually and are savegame compatible. “+” and “-” are freely allocable keys in the options menu. Braking deactivates cruise control, accelerating has no effect
      • NEW: The overall physics have been altered heavily for the grassland machines, in order to be able to bring them into the game. The vehicles can now consist of much more single rigid bodies
      • NEW: The new console command “debugJoints” displays the vehicles’ joints
      • NEW: Claas Liner 500 rake
      • NEW: Claas Volto 80 tedder
      • NEW: Claas Disco 2750 mowing unit
      • NEW: Swath drying through weather influence and machines, with parameters like surface and lower wetness
      • NEW: Swath is now being varied in height, depending on its volume
      • NEW: Fill tanks can now have multiple fill types. A baler can now collect straw from different crop varieties
      • NEW: Plants near vehicles can now be spread along Bézier curves
      • NEW: The console has been reworked - open/close: Shift+Esc; it’s half the window size by default now; log messages are being displayed; a bigger font can be set; Size and position of the messages can be freely selected; Ctrl+T: passive mode and transparent console background
      • NEW: There are new console commands:
      - listPlayerAttributes shows the player’s current position
      - listFruitAttributes shows all of the fruit parameters per quarter of a square meter
      - listGroundAttributes shows all of the ground parameters per square meter
      - listMachinesStates <vehicleID> shows the machine states like “raised” or “attached”
      - Enter “list” and press Tab to list all of the related commands
      • NEW: 6DOF joints have about 40 new parameters
      • NEW: You can now buy machines next to the player character’s position
      • NEW: Using ALT + TAB to switch to another window doesn’t switch the player’s machine anymore
      • The Tucano can now place chopped straw on the field

      • BUG FIX: Several save game problems have been fixed
      • BUG FIX: The weather system has been adjusted, there is less bad weather now
      • BUG FIX: The hose animations of Stapel and Dammann when being filled have been fixed
      • BUG FIX: Plants that are outside of fields are now being replaced by grass
      • BUG FIX: Linux specific AI bugs have been fixed
      • BUG FIX: Unfrozen bales don’t move any longer when they are on a parked trailer
      • BUG FIX: The dirt texture on newly spawned vehicles is working again. The “Dirt” (dirt 0-1) command can be used via the console again.
      • BUG FIX: The game shouldn’t crash any longer when you’re selling a vehicle in the vehicle fleet overview
      • BUG FIX: The calculation of the suspension when unloading the Joskin is now executed correctly
      • BUG FIX: The Wago’s wheels should now remain on the vehicle when it is being spawned
      • BUG FIX: Crops should now grow normally in all versions
      • BUG FIX: Chasers now don’t freeze any longer before the BGA’s entrance
      • BUG FIX: The controls are not reversed when “Gear must be changed for reversing” in set in the options anymore. The bug also doesn’t appear any longer when cruise control is activated in reverse gear
      • BUG FIX: Crops don’t appear outside of fields

      • CHANGE: Fruit parameters have been changed and new ones were added
      • CHANGE: The indoor Arion sounds are played correctly now
      • CHANGE: Changes have been made for assets with wrong shaders, this entailed framedrops
      • CHANGE: The three-point hitch and attaching methods are currently being fundamentally reworked
    • @peterdian Currently there is the update only on Steam because the launcher makes problems but not MBB lie! Maybe you change to the Steam version then you can already play the update!
      @Octopuss Steam is able to compress the files, so the smaller size and you can load it faster!
      CPU: Intel Core i7-8700,6x3700 MHz Turbo bis zu 4700 MHz, CPU-Kühler: CSL Maelstrom 120 Wasserkühlung, 500GB SSD +3000GB Seagate/Western Digital, 32GB DDR4-Ram, GTX 1080 Ti Armor 11G OC 11GB GDDR5X, Mainboard: ASUS Prime Z370-P, Netzteil: 700 Watt Power Boost 80+ Gold, Windows 10 Home 64-Bit, Logitech G29 und Saitek Seitenkonsole
    • Since I have no information when he works, we have to wait.
      CPU: Intel Core i7-8700,6x3700 MHz Turbo bis zu 4700 MHz, CPU-Kühler: CSL Maelstrom 120 Wasserkühlung, 500GB SSD +3000GB Seagate/Western Digital, 32GB DDR4-Ram, GTX 1080 Ti Armor 11G OC 11GB GDDR5X, Mainboard: ASUS Prime Z370-P, Netzteil: 700 Watt Power Boost 80+ Gold, Windows 10 Home 64-Bit, Logitech G29 und Saitek Seitenkonsole
    • The update for the launcher should be available soon!
      CPU: Intel Core i7-8700,6x3700 MHz Turbo bis zu 4700 MHz, CPU-Kühler: CSL Maelstrom 120 Wasserkühlung, 500GB SSD +3000GB Seagate/Western Digital, 32GB DDR4-Ram, GTX 1080 Ti Armor 11G OC 11GB GDDR5X, Mainboard: ASUS Prime Z370-P, Netzteil: 700 Watt Power Boost 80+ Gold, Windows 10 Home 64-Bit, Logitech G29 und Saitek Seitenkonsole
    • The update is ready in the launcher! If you are launching instead of updating, please click on "Reinstall" on the top left, then you have to see how he downloads packages with 0.3.0 and updates the version. The changelog left is currently not yet provided with 0.3.0!
      CPU: Intel Core i7-8700,6x3700 MHz Turbo bis zu 4700 MHz, CPU-Kühler: CSL Maelstrom 120 Wasserkühlung, 500GB SSD +3000GB Seagate/Western Digital, 32GB DDR4-Ram, GTX 1080 Ti Armor 11G OC 11GB GDDR5X, Mainboard: ASUS Prime Z370-P, Netzteil: 700 Watt Power Boost 80+ Gold, Windows 10 Home 64-Bit, Logitech G29 und Saitek Seitenkonsole
    • Bring in the Hay mission gets stuck on exit the tractor after driving back to the farm when it rains.
      UserBenchmarks: Game 93%, Desk 73%, Work 82%
      CPU: AMD Ryzen 7 1700 - 75.2%
      GPU: Nvidia GTX 1070 - 104.2%
      SSD: SanDisk SSD Plus 120GB - 64.8%
      HDD: Seagate Barracuda 2TB (2016) - 106.1%
      RAM: G.SKILL Ripjaws V DDR4 2133 C15 2x8GB - 77.7%
      MBD: MSI A320M GAMING PRO (MS-7A39)
      :thumbsup:
    • showgunn84 wrote:

      Bring in the Hay mission gets stuck on exit the tractor after driving back to the farm when it rains.
      This.
      R5 3900x / Crosshair 6 Hero / 32 GB Gskill FlareX 3200 / Vega 64 LC/ Samsung 960 Evo NVMe
      M.2 500GB / Samsung 840 Evo Sata 6 500Gb / 1TB WD Blue / Thermaltake 360mm AIO
      / Corsair HX 850w / Phanteks Enthoo Pro / Win10 Home 64 bit / LG 34UM88C 3440 x 1440 21 x 9 monitor.
    • Timeline Update


      I think for me, the thing that's really gonna
      pull me back into the game will be Ground, and Plant parameters... that's really gonna pull everything together, multiply the amount of work needed to be done each "season" and add that true Sim feeling the other game lacks... That is where this game will shine... IMO
      Nothin' Runs Like A Deere When It's Gettin' Chased By A Magnum

      Display Spoiler

      i7 6700k @4.6 ghz w/ 360mm AIO liquid cooler
      32gb Corsair Vengance 3200mhz
      2 Asus Strix GTX 1070's w/ HB Bridge
      Asus Maximus Hero VIII
      Corsair HX 850i
      256gb Samsung 960 Evo (Boot)
      512gb Samsung 860 Pro (Games and Programs)
      1tb WD Black (Recordings)
      2 2tb WD Red (Mass Storage & Back-ups)
      Asus Blu-Ray Burner
      Corsair 780T
      APC 1500VA UPS w/ additional battery